Insulation & Concrete Lifting in Wilkes-Barre, PA
Spray foam, blown-in and injection foam insulation, air sealing and polyurethane concrete lifting for Wilkes-Barre homes, rentals and businesses. Free on-site estimates.
- A+ BBB rating
- Since 2006 serving NEPA
- 4.7★ on Google (22 reviews)
- Free on-site estimates
Century-Old Homes, Valley Winters and Shifting Slabs: Why Wilkes-Barre Projects Are Different
Wilkes-Barre has some of the oldest housing in Northeastern Pennsylvania. The U.S. Census Bureau counts 46.9% of the city’s homes built in 1939 or earlier and another 10.9% in the 1940s, and the median home was built in 1943. Most of those houses were framed and plastered with nothing in the walls, and plenty still have thin attics and open rim joists.
The Wyoming Valley adds its own problems. Winters are long, the Susquehanna sits right behind the levee, and much of the city was built over anthracite mines and fill. Walks, steps and driveway slabs sink, and older basements and crawlspaces stay damp and cold.
EnergySmart has insulated and lifted concrete across Northeastern Pennsylvania since May 2006. We are based at 432 Pancoast St, Scranton, PA 18512, a short drive up Interstate 81, and every Wilkes-Barre project starts with a free on-site assessment and a written quote.
- BBB A+ rating
- Serving NEPA since 2006
- PA HIC #175076
- 1-year warranty
- 4.7★ on Google
- 30 years combined experience
- Residential and commercial
Wilkes-Barre Service at a Glance
Insulation (spray foam, blown-in, injection foam, batts), air sealing, soundproofing, insulation removal and polyurethane concrete lifting
All of Wilkes-Barre plus Kingston, Plains, Hanover Township, Ashley, Wilkes-Barre Township and the rest of the Wyoming Valley
Pre-1940 singles and doubles with plaster walls and balloon framing; postwar homes in the outer neighborhoods
R-49 to R-60 for an uninsulated attic in this climate zone, per ENERGY STAR
Polyurethane foam through 5/8-inch holes; most homes done in two to four hours
Written quote after a free on-site assessment; lifting usually about half the cost of replacement
Registered Pennsylvania home improvement contractor, PA HIC #175076
Monday to Friday, 8 a.m. to 5 p.m.
What Wilkes-Barre Homeowners Call About Most
Six problems account for most of our Wilkes-Barre calls. Nearly all of them come back to the age of the housing, the valley climate or the ground under the city.
Cold rooms and high gas bills
About 73% of occupied Wilkes-Barre homes heat with utility gas (Census). With empty plaster walls and thin attics, much of that heat leaks straight out, and upstairs bedrooms and rooms over porches feel it first.
Drafts through balloon framing
Many older houses were balloon framed, with wall cavities open from the basement to the attic. Cold air rises through them like a chimney. Air sealing the top and bottom of those cavities stops the draft at the source.
Ice dams and frosty attics
Heat leaking into the attic melts roof snow, which refreezes at the cold eaves and backs water under the shingles. Air sealing plus attic insulation keeps the roof deck cold.
Damp, cold basements and crawlspaces
Older valley basements and crawlspaces stay cold and damp. Closed-cell spray foam on rim joists and crawlspace walls insulates and blocks air and moisture at the same time.
Sunken walks, steps and driveways
Freeze-thaw cycles, water washing soil out from under slabs, and old fill over mined ground open voids beneath concrete, so slabs drop and tilt toward the house.
Noise and heat loss in doubles and apartments
Roughly 22% of Wilkes-Barre homes are attached houses or two-unit buildings, and another 11.5% are in buildings with 20 or more units (Census). Shared walls and floors carry sound and heat between neighbors.

Who calls us most
Owners of older singles and doubles in the Heights, Parsons, the North End and South Wilkes-Barre; landlords with rentals near King’s College and Wilkes University (49% of Wilkes-Barre homes are renter-occupied, per the Census); and businesses with settled walks, loading areas or uninsulated buildings downtown.
Two honest limits
Insulation will not fix a wet basement after a flood or an active roof leak; those come first. And polyurethane lifting corrects ordinary settlement, not damage from an active mine collapse, which is an insurance and DEP matter (see below). We will tell you which situation you have before we quote.
Insulation Services in Wilkes-Barre
Most Wilkes-Barre homes need a combination: air sealing first, then the right material for each area. We recommend what fits your house, not a one-size package.
Spray foam insulation
Open-cell and closed-cell spray foam seals and insulates in one step. It is the go-to for rim joists, crawlspaces, attics and new construction.
Blown-in fiberglass and cellulose
The fastest way to bring a thin attic up to the recommended level. Blown-in fiberglass and cellulose fill irregular joist bays in older homes.
Injection foam
Injection foam fills closed wall cavities through small holes, so plaster-walled homes get insulated walls without demolition.
Fiberglass batts
Batt insulation for open framing in renovations, additions, basements and new builds.
Air sealing
Air sealing closes attic bypasses, top plates and penetrations first, so the insulation can do its job and ice dams stop forming.
Soundproofing and removal
Soundproofing for party walls, floors and ceilings, and insulation removal for wet, moldy or pest-damaged material.
Concrete Lifting and Leveling in Wilkes-Barre
Sunken concrete is easy to spot in Wilkes-Barre: front walks tipping toward the foundation, porch steps pulling away, driveway slabs with a lip that catches a mower or a shoe. Polyurethane concrete lifting raises the existing slab instead of tearing it out.
We drill small holes, inject high-density polyurethane foam that expands to fill the void underneath, lift the slab back to level and patch the holes. The foam is light, so it adds very little weight to soft valley soil, and it will not wash out the way mudjacking slurry can.
- High-density polyurethane foam injected through 5/8-inch holes, patched afterward
- The foam cures in about 15 minutes; most residential jobs take two to four hours
- Usually about half the cost of tearing out and replacing the slab
- Driveways, sidewalks, porches, patios, steps, pool decks, garage and basement floors
- Commercial work too: parking areas, loading docks and warehouse floors

Why Wilkes-Barre Homes Lose Heat and Wilkes-Barre Concrete Sinks
of Wilkes-Barre homes were built before 1950 (46.9% before 1940)
Source: U.S. Census Bureau, ACS 2020–2024median year Wilkes-Barre homes were built
Source: U.S. Census Bureau, ACS 2020–2024heating degree days a year at Wilkes-Barre/Scranton International Airport, with 45 inches of snow
Source: NOAA climate normals 1991–2020of occupied Wilkes-Barre homes heat with utility gas; 21% with electricity
Source: U.S. Census Bureau, ACS 2020–2024Built before insulation was standard
More than half the city’s housing predates 1950 (Census). Walls were plastered over empty cavities, and many attics still have a few inches of old, compressed insulation. Injection foam or dense-pack fill is often the biggest single upgrade.
A long heating season
NOAA’s 1991–2020 normals for Wilkes-Barre/Scranton International Airport show 5,740 heating degree days, 45 inches of snow and an average January low of about 20°F. That much heating demand is why air sealing and attic insulation pay back quickly here.
River, levee and mined ground
Much of the Wyoming Valley was built over anthracite mines and fill, and parts of the city sit in the Susquehanna floodplain. Ordinary settlement is what lifting fixes. For damage from abandoned mines, Pennsylvania DEP offers mine subsidence insurance, and its online risk map checks any address.
How a Wilkes-Barre Project Works
Call or request an estimate
Call (570) 558-0941 or use the form below. Tell us what you are seeing (cold rooms, high bills, ice dams, a sunken walk or driveway) and roughly how old the home is.
Free on-site assessment
An estimator checks the attic, walls, basement or crawlspace, or measures how far each slab has dropped and why. In older homes we also look for knob-and-tube wiring and moisture problems.
Clear recommendation
You get the right material for each area and the target level, for example R-49 to R-60 in an uninsulated attic, or a lift plan for each settled slab.
Written quote
Your price, scope and dates in writing before any work starts, with our registration number (PA HIC #175076) on it, as Pennsylvania’s Home Improvement Consumer Protection Act requires.
Installation
Clear access to the work areas before the crew arrives. Spray-foam areas stay unoccupied while the foam is applied and cures; lifted concrete is ready soon after the holes are patched.
Walkthrough and cleanup
The crew cleans up and walks you through the finished work. Every job is covered by our one-year warranty on services, and questions after the first heating season are always welcome.
What Insulation and Concrete Lifting Cost in Wilkes-Barre
We do not publish flat prices because Wilkes-Barre homes vary too much: a 1910 balloon-framed double with empty walls is a very different job from a 1960s ranch that only needs an attic top-up. Every quote is free, written and based on what we find on site.
| Project | How it is priced | What changes the price |
|---|---|---|
| Attic insulation top-up | Free on-site quote | Attic size, current depth, access, air sealing needed first |
| Wall insulation (injection foam or blown-in) | Free on-site quote | Wall area, plaster vs drywall, wiring that must be corrected first |
| Spray foam (attic, basement, rim joists, crawlspace) | Free on-site quote | Square footage, open-cell vs closed-cell, depth required |
| Insulation removal | Free on-site quote | Amount and condition of old material, attic access |
| Concrete lifting | Free on-site quote, usually about half the cost of replacement | Slab size, how far it dropped, void size underneath |
| Commercial projects | Estimate from plans or site visit | Building size, schedule and specification |
Permits, Registration and Rebates for Wilkes-Barre Projects
Contractor registration
Pennsylvania’s Home Improvement Consumer Protection Act requires home improvement contractors (anyone doing $5,000 or more a year) to register with the Attorney General and put the registration number on estimates and contracts. EnergySmart is registered as PA HIC #175076.
Written contracts
Under the same law, a home improvement contract must be in writing and signed, with the total price and the start and completion dates. Every EnergySmart quote is written.
Federal tax credit has ended
The IRS confirms the 25C Energy Efficient Home Improvement Credit is not allowed for property placed in service after December 31, 2025. Insulation installed in 2026 no longer qualifies.
Free weatherization for income-qualified homes
Households at or below 200% of the federal poverty level may qualify for free insulation and air sealing through the state Weatherization Assistance Program. PPL Electric customers can also apply to PPL’s WRAP program (1-888-232-6302).
City of Wilkes-Barre permits
The city requires building permits for building work such as framing, sheetrock and siding, and for driveways and curb cuts. Permits are issued to city-licensed contractors, or to homeowners working on their own primary residence. Questions go to Building Code Enforcement, 1st floor of City Hall, 40 East Market Street, (570) 208-1629.
Floodplain and mine subsidence
Work in a mapped flood zone may also need the city’s Floodplain Development Permit (listed on the permits page). Standard homeowner policies usually exclude mine subsidence; DEP’s Mine Subsidence Insurance program covers it, and the MSI risk map shows whether your address sits over mapped mines.
Rebate, credit and permit rules change. Details above were checked against the official pages in November 2026; confirm with the program or the city before you count on them.
Wilkes-Barre Neighborhoods and Nearby Towns We Serve
We work in every part of Wilkes-Barre and across the Wyoming Valley, including:
Nearby service areas
We also serve Kingston, Pittston, Nanticoke, Dallas, Mountain Top, Hazleton and the rest of Luzerne County, plus Scranton and Lackawanna County.
Coming from Scranton
Our office is at 432 Pancoast St, Scranton, PA 18512. Crews come down Interstate 81, and we schedule Wilkes-Barre work Monday to Friday between 8 a.m. and 5 p.m.

Why Wilkes-Barre Homeowners Choose EnergySmart
- Serving Northeastern Pennsylvania since May 2006
- Owned and run by Bryan Zayac
- Registered Pennsylvania home improvement contractor (PA HIC #175076)
- A+ rating with the Better Business Bureau
- 4.7 stars across 22 Google reviews
- 30 years of combined installation experience on the team
- Insulation and concrete lifting from one company, one estimate
- Free on-site assessments and written quotes
- One-year warranty on all services
- In-house commercial estimators for larger buildings
“Best bid out of 5 contractors. Prompt and efficient. Great job. Very Pleased. We would hire them again without hesitation.”
Anne K., Wapwallopen, PA (Luzerne County)
“Professional from the jump. We agreed on a price, job was executed on schedule and the workers even swept the floor when they were finished.”
Rebecca B., Google review
“Work was completed exactly as quoted and without any delays. They gave us a very fair price. Best of all they left our place spotless!”
Susan W., Google review
Quotes from our customer reviews page and Google reviews.
Contact Details for Wilkes-Barre Service
| Business name | EnergySmart (Energy Smart Insulation, Inc.) |
|---|---|
| Owner | Bryan Zayac |
| Business type | Insulation and concrete lifting contractor |
| Office address | 432 Pancoast St, Scranton, PA 18512 |
| Phone | (570) 558-0941 |
| info@nepaenergysmart.com | |
| Hours | Monday to Friday, 8:00 a.m. to 5:00 p.m.; closed Saturday and Sunday |
| Estimates | Free on-site assessment before every quote |
| Primary service area | Wilkes-Barre, PA and the Wyoming Valley |
| Also serving | Luzerne, Lackawanna, Carbon, Monroe, Wyoming and Wayne counties |
| In business since | May 2006 |
| PA contractor registration | PA HIC #175076 |
| BBB rating | A+ |
| Warranty | One year on all services |
| Google Business Profile | EnergySmart on Google Maps |
Wilkes-Barre service area
We cover the whole city of Wilkes-Barre, shown below, plus the surrounding Wyoming Valley towns.
Wilkes-Barre Insulation and Concrete Lifting FAQs
How much does insulation cost in Wilkes-Barre?
Every Wilkes-Barre quote is written after a free on-site assessment, because homes vary too much for flat pricing. The price depends on the areas treated, the material (closed-cell spray foam costs the most per inch; blown-in costs less), access, removal of old insulation and any wiring that must be corrected first. Pennsylvania law requires the final contract to be in writing with the total price.
How does concrete lifting work, and what does it cost in Wilkes-Barre?
High-density polyurethane foam is injected through 5/8-inch holes drilled in the sunken slab. The foam expands to fill the void and lifts the concrete back to level. It cures in about 15 minutes, most residential jobs take two to four hours, and the holes are patched afterward. Lifting usually costs about half as much as tearing out and replacing the slab; your exact price depends on slab size, how far it dropped and the void underneath.
What insulation works best in Wilkes-Barre’s older homes?
For finished plaster walls, injection foam or dense-pack blown-in fills the cavities through small holes, with no demolition. In balloon-framed houses we air seal the open wall tops and bottoms first. Spray foam is best for rim joists, crawlspaces and attics that need an air seal. For an uninsulated attic in this climate zone, ENERGY STAR recommends R-49 to R-60.
Do I need a permit for insulation or concrete work in Wilkes-Barre?
The City of Wilkes-Barre requires building permits for building work such as framing, sheetrock and siding, and for driveways and curb cuts. Permits are issued to city-licensed contractors or to homeowners working on their own primary residence. Confirm your project with Building Code Enforcement at City Hall, 40 East Market Street, (570) 208-1629.
My house is in the flood zone. Can I still insulate the basement?
Yes, but material choice matters. Closed-cell spray foam resists water and does not hold moisture the way fiberglass batts do, so it is the usual choice for rim joists and basement or crawlspace walls in flood-prone areas. Work in a mapped flood zone may also need the city’s Floodplain Development Permit.
Can concrete lifting fix mine subsidence damage?
No. Lifting fixes ordinary settlement from freeze-thaw cycles, washout and old fill, which covers most sunken walks and driveways in the Wyoming Valley. Damage from a collapsing abandoned mine is a structural and insurance matter. Pennsylvania DEP’s Mine Subsidence Insurance program covers it, and its online risk map checks any address.
Are there rebates or tax credits for insulation in 2026?
The federal 25C tax credit ended for insulation placed in service after December 31, 2025, so 2026 jobs no longer qualify. Income-qualified households may get free insulation and air sealing through Pennsylvania’s Weatherization Assistance Program, and PPL Electric customers can apply for PPL’s WRAP program.
Can insulation go over knob-and-tube wiring?
Not until it is checked. Knob-and-tube wiring was designed to shed heat into open air, and burying live knob-and-tube in insulation is a fire risk. If the assessment finds active knob-and-tube in the attic or walls, an electrician needs to correct or replace it first. We check for it on every older home.
Do you work on rentals and student housing in Wilkes-Barre?
Yes. Nearly half of Wilkes-Barre’s occupied homes are rentals, many of them doubles and converted houses near the colleges. Air sealing and insulation cut heating costs and comfort complaints, and soundproofing between units can be done during the same visit. Landlords get the same free assessment and written quote.
Is EnergySmart registered and reviewed?
EnergySmart (Energy Smart Insulation, Inc.) has served Northeastern Pennsylvania since May 2006, is registered with the Pennsylvania Attorney General as a home improvement contractor (PA HIC #175076), holds an A+ rating with the Better Business Bureau, and is rated 4.7 stars across 22 Google reviews. The installation team brings 30 years of combined experience, and every job comes with a one-year warranty on services.
Which Wilkes-Barre-area towns do you cover?
All of Wilkes-Barre, including downtown, the Heights, Parsons, Miners Mills, the North End and South Wilkes-Barre, plus Kingston, Forty Fort, Plains, Hanover Township, Ashley, Wilkes-Barre Township, Swoyersville, Edwardsville and the rest of Luzerne County.
Get Your Free Wilkes-Barre Estimate
Tell us about the project: the rooms that are cold, the attic or walls you want insulated, or the slab that has sunk. We will call to set up a free on-site assessment.
Prefer to talk? Call (570) 558-0941, Monday to Friday, 8 a.m. to 5 p.m.
Ready for a Warmer Home or a Level Walk in Wilkes-Barre?
Book a free on-site assessment. You will get a clear recommendation and a written quote, with no pressure.






